5-60W LED Power de iluminação de emergência com auto-teste para a luz do painel LED, conversão de emergência para baixo
Driver de emergência do painel de LED com botão de teste externo e indicador de LED.
- Auto-teste mensal e autoteste anual.
- Pode personalizar diferentes tempo de emergência.
Descrição do produto
Model
|
FAT-LED-F1E B
LED emergency battery driver
|
Material
|
ABS+PCB+Battery pack
|
Power
|
5-60W, 80W max.
|
Emergency Power
|
6-10W
|
Charge Time
|
24 Hours
|
Emergency Time
|
180mins
(Can be custom-made)
|
Battery
|
Lithium battery 11.1V 2000mAh
|
Input Voltage
|
AC85V-265V 50/60Hz
|
AC Protection
|
1A 250V
|
DC Protection
|
5A 250V
|
Battery cycle time
|
>500 times
|
Working Temperature
|
0℃—55℃
|
IP Rank
|
IP30
|
Luminous Flux
|
>1000lm
|
Battery cycle time
|
>500 times
|
Dimension
|
Housing: 160 x 42 x 22 mm
Battery: L200 x φ18 mm
|
Type of Lamp
|
all 5-60W LED light with internal or external driver
|
Driver de emergência LED com botão de teste externo e indicador de LED.
- Tipo integrado.
- Fonte de alimentação de emergência padrão de 90mins.
Driver de emergência do tubo LED com botão de teste integrado e indicadores de LED.
- Tipo integrado.
- Fonte de alimentação de emergência padrão de 90mins
Diagrama de fiação LED Inverter LED Power Converter
Fonte de alimentação de emergência para a luz LED de 5-30W com driver interno ou externo: f1e led-f1e a
Kit de conversão de luz de emergência
Nossos serviços: mais kits de emergência LED,
Módulo de pacote de emergência de bateria e fonte de luz
NOTA: O positivo e o negativo da bateria não devem ser conectados reversos e devemos evitar o curto-circuito diretamente a bateria. A explosão será causada se o uso da bateria incomparável. Por favor, cumpra as regras locais ao descartar a bateria velha.
AVISO: Como o PCB interno inclui tensão de 220V/50Hz, por isso deve ser descarregado/aberto apenas pelo técnico profissional.
Botão de teste
- Pode testar se o motorista de emergência trabalha corretamente durante a inspeção Regular.
Luz indicadora
- Indicador vermelho: status de carregamento
- Indicador azul: status de emergência
- Indicador verde: status de energia principal
Problems
|
Analysis
|
Solution
|
Green Light not working
|
Something wrong with the led driver
|
Checking the led driver
|
Green light is broken or the circuit is disconnected
|
Checking circuit or changing green light
|
Red light is off
|
Not being charged
|
Checking the charging circuit or battery
|
Red light is broken or the circuit is disconnected
|
Checking circuit or changing red light
|
Battery is full charged
|
Disconnecting the main power supply, make the led lights work in emergency status for 30 minutes, make the led light return to work in main power status again
|
Blue light is off
|
The battery is open circuit
|
Checking the battery
|
Light source is open circuit or short circuit
|
Ensuring light source is connected correctly
|
PCB is broken
|
Checking the Maintaining the circuit board
|
Certificação
Com Certificado de patente de design e patente do modelo de utilidade. CE ROHS CB aprovado.
Informações da Empresa
Conjunto de iluminação de emergência